Silicon Rubber Processing Process Five Characteristics

Silicon rubber such as Silicone Rubber for Climbing Holds can be processed by common rubber processing equipment. The processing process of silicon rubber has the following characteristics:

1. The mixed

Silicone rubber is softer. Has a certain plasticity, can not be directly used in the opening mill or mill mixing mixing.

2. Squeeze out

Silicon rubber such as rtv2 Silicone Rubber For Furniture Mold is generally softer. Good extrusion effect. It is easy to operate and can extrude products of various shapes and sizes. Its processing equipment and tools are basically similar to ordinary rubber.

(3) calender

Calender general use vertical three - roll calender. For the production of film, the speed of the middle roll is faster than that of the upper roll, and the speed ratio is (1.1-1.4) : 1. The speed of the lower roll is the same as that of the middle roll.

4. Glue

It refers to the method of distributing silicone rubber slurry or squeegee evenly on the fabric to improve the strength and flexural properties of the thin film products, make the fabric resistant to moisture, and make the electrical insulation materials resistant to high temperature.

The bind 5.

Silicone rubber can be bonded to many materials, including metals, plastics, ceramics, fibers, silicone rubber itself and some other rubber. The best adhesion between the silicone rubber and the coating can be achieved by using a adhesive that can be vulcanized at the same time as the silicone rubber itself.

• PreviousGUOCHUANG SILICONE CO., LTD.
• Next Seven Key Points of Liquid Silicon Rubber Die Design